Increasing the distance between the slits decreases the fringe width, making the fringes closer together.

Increasing the distance between the slits decreases the fringe separation as fringe width is inversely proportional to the slit separation.

According to the Biot-Savart Law, the magnetic field strength decreases with increasing distance from the current-carrying wire.

According to Biot-Savart Law, the magnetic field strength decreases with increasing distance from the conductor.

According to the Biot-Savart Law, the magnetic field strength decreases with increasing distance from the wire.

The magnetic field strength decreases with increasing distance from a long straight wire, following the inverse relationship with distance.

Increasing the distance from the pivot point increases the torque produced by the force.

Inductive reactance (XL) is given by XL = 2πfL, so increasing the frequency (f) increases the inductive reactance.

The photoelectric current increases with frequency until the threshold frequency is reached, after which it depends on intensity.

Inductive reactance increases with frequency, as X_L = 2πfL.

Inductive reactance (XL) is given by the formula XL = 2πfL, where f is the frequency. Thus, increasing frequency increases inductive reactance.

Capacitive reactance Xc = 1/(2πfC), so increasing frequency decreases Xc.

Capacitive reactance X_C = 1/(ωC) decreases with increasing frequency.

The impedance of a capacitor decreases with increasing frequency.

The impedance (Z) of a series RLC circuit depends on the values of resistance (R), inductance (L), capacitance (C), and frequency (f). As frequency increases, the inductive reactance increases and capacitive reactance decreases, affecting the total impedance.

The impedance of an inductor (Z_L) increases with frequency, as Z_L = jωL, where ω = 2πf.

The total impedance can increase or decrease depending on the relationship between R, XL, and XC as frequency changes.

Increasing the height of a satellite decreases its orbital speed, as the gravitational force acting on it decreases.

Increasing the intensity of light increases the number of emitted electrons but does not affect their energy, which depends on the frequency.

Increasing the intensity of light increases the number of emitted photoelectrons but does not affect their energy.

The maximum kinetic energy of the emitted electrons is dependent only on the frequency of the incident light, not on its intensity.

The maximum kinetic energy of emitted electrons remains the same as it depends only on the frequency of the incident light, not its intensity.

Resistance (R) is directly proportional to length (L); increasing length increases resistance.

Resistivity is an intrinsic property of the material and does not change with length.

If the orbital speed is to remain constant, increasing the mass of the satellite requires an increase in the orbital radius due to the balance of gravitational and centripetal forces.

The mass of the satellite does not affect the orbital radius if the speed is constant, as the gravitational force and centripetal force balance each other.

The mass of the satellite does not affect its orbital radius; it is determined by the mass of the Earth and the orbital speed.

The orbital speed of a satellite depends on the mass of the Earth and the radius of the orbit, but not on the mass of the satellite itself. Therefore, increasing the mass of the satellite has no effect on its orbital speed.

Increasing the mass of either or both objects increases the gravitational force between them.

Increasing the molecular weight of a polymer generally leads to an increase in viscosity due to longer chain lengths and entanglements.