The unit of force (Newton) is derived from mass, length, and time: kg·m/s².

The SI unit of force is the Newton (N).

The SI unit of power is defined as Joule per second (Watt).

The SI unit of power is the Watt (W).

One joule is defined as one newton meter (N·m).

Viscosity measures a fluid's resistance to flow; higher viscosity means the fluid flows less easily.

The work done by an ideal gas during an isothermal expansion is given by W = nRT ln(Vf/Vi), where Vf and Vi are the final and initial volumes.

For capacitors in series, 1/C_eq = 1/C1 + 1/C2. Thus, 1/C_eq = 1/2 + 1/3 = 5/6, giving C_eq = 6/5 = 1.2μF.

According to Coulomb's law, F ∝ 1/r². Reducing the distance to half increases the force by a factor of 4.

According to Coulomb's law, F ∝ q1 * q2. If both charges are doubled, the force becomes 4 times the original force.

The buoyant force increases with the density of the fluid, as it is directly proportional to the fluid's density.

Inserting a dielectric material increases the capacitance of the capacitor by a factor equal to the dielectric constant of the material.

Inserting a dielectric material between the plates of a capacitor increases its capacitance due to the material's ability to reduce the electric field.

The capacitance increases when a dielectric material is introduced, as it reduces the electric field between the plates.

According to Ohm's Law, if the voltage increases while resistance remains constant, the current will also increase.

According to Ohm's Law, if the voltage (V) increases while resistance (R) remains constant, the current (I) will increase.

According to Ohm's Law, if the voltage (V) is tripled and resistance (R) remains constant, the current (I) will also triple (I = V/R).

In a parallel circuit, removing one branch does not affect the current in the other branches.

In a series circuit, if one component fails, the current stops flowing through the entire circuit.

Density increases when a material is compressed, as mass remains constant while volume decreases.

The density of a solid increases when it is subjected to uniform compression.

The electric field E is directly proportional to the charge, so if the charge is doubled, the electric field also doubles.

When a capacitor is disconnected from a battery and the plates are moved further apart, the electric potential energy increases because the capacitance decreases while the charge remains constant.

As the object distance increases in a convex lens, the image distance also increases, moving further away from the lens.

As the object moves closer to a concave mirror, the image distance increases, and the image becomes larger and more distant.

As the object is moved closer to the focal point of a convex lens, the image distance increases and the image becomes larger and virtual.

When the object is placed beyond twice the focal length, the image formed is real, inverted, and smaller than the object.

When the object is placed within the focal length of a convex lens, the image formed is virtual and erect.

The induced EMF doubles if the speed of the magnet moving through the coil is doubled.

The induced emf increases when the rate of change of magnetic flux increases, according to Faraday's Law.