In series, R_total = R1 + R2 = 5Ω + 10Ω = 15Ω.

Increasing the plate area while keeping the distance constant increases the capacitance, as capacitance is directly proportional to the area of the plates.

Power P = V^2/R = 5^2/10 = 25/10 = 2.5W.

Total resistance R = 10Ω + 5Ω = 15Ω. Voltage V = I * R = 2A * 15Ω = 30V.

Total resistance R = 4Ω + 4Ω = 8Ω. Current I = V/R = 12V/8Ω = 1.5A.

The voltage drop across the resistor is equal to the battery voltage, which is 15V.

The total resistance is 15Ω. The current I = V/R = 15V/15Ω = 1A. Voltage drop across 10Ω = I * R = 1A * 10Ω = 10V.

Power (P) can be calculated using P = V^2 / R. Here, P = 24V^2 / 6Ω = 96W.

Power P = V^2/R = 24^2/8 = 576/8 = 72 W.

Total resistance R = 3Ω + 6Ω = 9Ω. Current I = V/R = 9V/9Ω = 1A.

Total resistance R_total = 3Ω + 6Ω = 9Ω. Current I = V/R_total = 9V/9Ω = 1A. Voltage across 6Ω = I * R = 1A * 6Ω = 6V.

Using Ohm's Law, R = V/I = 24V / 6A = 4Ω.

In a circuit with an inductor, the current increases gradually due to the inductor's opposition to changes in current.

Using Ohm's Law, V = I * R = 5A * 10Ω = 50V.

Using Ohm's Law, V = I * R = 5A * 10Ω = 50V.

According to Ohm's law, I = V/R. If R is doubled, I will be halved.

Using Ohm's Law, R = V / I = 24V / 3A = 8Ω.

According to Ohm's law, if V is tripled, I will also triple.

According to the first law of thermodynamics, if the internal energy increases, it implies that heat is added to the system and/or work is done on the system.

According to the first law of thermodynamics, if the internal energy increases, it implies that either work is done on the system or heat is added to the system.

The focal length of a concave lens is always negative, as it diverges light rays.

The focal length of a concave lens is considered negative as it diverges light rays.

The focal length of a concave lens is negative, indicating that it diverges light rays.

Decreasing the slit width increases the diffraction angle, causing the central maximum to become wider.

Increasing the slit separation d decreases the fringe width, causing the fringes to move closer together.

Using polychromatic light results in overlapping patterns of different wavelengths, causing the overall pattern to become broader.

In a fluid at rest, the pressure at a point depends on the depth of the fluid above that point.

In a fluid at rest, the pressure at a point depends on the height of the fluid column above it, as described by hydrostatic pressure.

In a fluid, pressure increases with depth due to the weight of the fluid above.

Hydrostatic head is the height of a fluid column that exerts a certain pressure, calculated as pressure divided by the density and gravitational acceleration.