Elasticity
Q. A cylindrical rod is subjected to a tensile force. If the diameter of the rod is doubled while keeping the length constant, what happens to the stress in the rod?
A.
Increases
B.
Decreases
C.
Remains the same
D.
Becomes zero
Show solution
Solution
Stress is defined as force per unit area. Doubling the diameter increases the area by a factor of four, thus reducing the stress.
Correct Answer: B — Decreases
Learn More →
Q. A cylindrical rod is subjected to a tensile force. If the radius of the rod is halved while keeping the length constant, how does the tensile stress change?
A.
It doubles
B.
It halves
C.
It quadruples
D.
It remains the same
Show solution
Solution
Tensile stress is given by force/area. Halving the radius reduces the area by a factor of four, thus the stress quadruples for the same force.
Correct Answer: C — It quadruples
Learn More →
Q. A material has a bulk modulus of 200 GPa. If the pressure applied to it is increased by 50 MPa, what is the fractional change in volume?
A.
0.00025
B.
0.0005
C.
0.0025
D.
0.005
Show solution
Solution
The fractional change in volume is given by ΔV/V = ΔP/B. Here, ΔP = 50 MPa = 0.05 GPa, so ΔV/V = 0.05/200 = 0.00025.
Correct Answer: A — 0.00025
Learn More →
Q. A material has a bulk modulus of 200 GPa. If the pressure on the material is increased by 10 MPa, what is the fractional change in volume?
A.
0.00005
B.
0.0001
C.
0.0002
D.
0.00025
Show solution
Solution
The fractional change in volume ΔV/V is given by ΔV/V = ΔP/B, where ΔP = 10 MPa and B = 200 GPa, resulting in 0.00005.
Correct Answer: B — 0.0001
Learn More →
Q. A material has a bulk modulus of 200 GPa. What is the change in volume when a pressure of 50 MPa is applied?
A.
0.0125%
B.
0.025%
C.
0.05%
D.
0.1%
Show solution
Solution
The change in volume ΔV/V = P/B, so ΔV/V = 50 MPa / 200 GPa = 0.025%.
Correct Answer: B — 0.025%
Learn More →
Q. A material is said to be elastic if it:
A.
Returns to its original shape after deformation
B.
Can be permanently deformed
C.
Breaks under stress
D.
Has a high tensile strength
Show solution
Solution
A material is considered elastic if it returns to its original shape after the removal of the applied stress.
Correct Answer: A — Returns to its original shape after deformation
Learn More →
Q. A material is subjected to a tensile stress of 100 MPa and experiences a strain of 0.002. What is its Young's modulus?
A.
50 GPa
B.
100 GPa
C.
200 GPa
D.
500 GPa
Show solution
Solution
Young's modulus (Y) = Stress / Strain = 100 MPa / 0.002 = 50 GPa.
Correct Answer: B — 100 GPa
Learn More →
Q. A spring obeys Hooke's law. If the spring constant is doubled, what happens to the elongation for the same applied force?
A.
Elongation doubles
B.
Elongation halves
C.
Elongation remains the same
D.
Elongation quadruples
Show solution
Solution
According to Hooke's law, elongation is inversely proportional to the spring constant; thus, if the spring constant is doubled, the elongation halves.
Correct Answer: B — Elongation halves
Learn More →
Q. A spring stretches 5 cm when a load of 10 N is applied. What is the spring constant?
A.
200 N/m
B.
100 N/m
C.
50 N/m
D.
25 N/m
Show solution
Solution
Using Hooke's law, k = F/x = 10 N / 0.05 m = 200 N/m.
Correct Answer: B — 100 N/m
Learn More →
Q. A wire of length L and cross-sectional area A is stretched by a force F. If the Young's modulus of the material is Y, what is the extension of the wire?
A.
F * L / (A * Y)
B.
A * Y * L / F
C.
F * A / (Y * L)
D.
Y * L / (F * A)
Show solution
Solution
The extension of the wire can be calculated using the formula: extension = (F * L) / (A * Y).
Correct Answer: A — F * L / (A * Y)
Learn More →
Q. A wire of length L and cross-sectional area A is stretched by a force F. What is the expression for the elongation ΔL?
A.
ΔL = FL / (AE)
B.
ΔL = AE / (FL)
C.
ΔL = EFL / A
D.
ΔL = A / (FL)
Show solution
Solution
The elongation ΔL of a wire is given by ΔL = FL / (AE), where E is Young's modulus.
Correct Answer: A — ΔL = FL / (AE)
Learn More →
Q. A wire of length L and cross-sectional area A is stretched by a force F. What is the expression for the elongation of the wire?
A.
ΔL = (F * L) / (A * Y)
B.
ΔL = (Y * F) / (A * L)
C.
ΔL = (A * Y) / (F * L)
D.
ΔL = (F * A) / (Y * L)
Show solution
Solution
The elongation ΔL of a wire is given by ΔL = (F * L) / (A * Y), where Y is Young's modulus.
Correct Answer: A — ΔL = (F * L) / (A * Y)
Learn More →
Q. If a material exhibits a linear stress-strain relationship, what type of material is it likely to be?
A.
Brittle material
B.
Ductile material
C.
Elastic material
D.
Plastic material
Show solution
Solution
A linear stress-strain relationship indicates that the material behaves elastically within the limit of proportionality.
Correct Answer: C — Elastic material
Learn More →
Q. If a material exhibits plastic deformation, which of the following is true?
A.
It returns to its original shape after the load is removed
B.
It does not return to its original shape after the load is removed
C.
It behaves like a perfect elastic material
D.
It has a very high Young's modulus
Show solution
Solution
Plastic deformation means that the material does not return to its original shape after the load is removed.
Correct Answer: B — It does not return to its original shape after the load is removed
Learn More →
Q. If a material has a Poisson's ratio of 0.3, what does this imply about its behavior under stress?
A.
It expands laterally
B.
It contracts laterally
C.
It does not change shape
D.
It becomes brittle
Show solution
Solution
A Poisson's ratio of 0.3 indicates that the material will contract laterally when stretched.
Correct Answer: B — It contracts laterally
Learn More →
Q. If a material has a Poisson's ratio of 0.3, what does this imply about its lateral strain when subjected to axial strain?
A.
Lateral strain is equal to axial strain
B.
Lateral strain is 0.3 times the axial strain
C.
Lateral strain is 3 times the axial strain
D.
Lateral strain is independent of axial strain
Show solution
Solution
A Poisson's ratio of 0.3 means that the lateral strain is 0.3 times the axial strain.
Correct Answer: B — Lateral strain is 0.3 times the axial strain
Learn More →
Q. If a material has a Poisson's ratio of 0.3, what does this imply?
A.
It expands laterally when stretched
B.
It contracts laterally when stretched
C.
It has no lateral strain
D.
It is incompressible
Show solution
Solution
A Poisson's ratio of 0.3 implies that the material contracts laterally when stretched.
Correct Answer: B — It contracts laterally when stretched
Learn More →
Q. If a material has a Young's modulus of 200 GPa, what does this indicate?
A.
It is very elastic
B.
It is very brittle
C.
It is very ductile
D.
It is very plastic
Show solution
Solution
A high Young's modulus indicates that the material is very elastic.
Correct Answer: A — It is very elastic
Learn More →
Q. If a material is stretched beyond its elastic limit, what happens?
A.
It returns to its original shape
B.
It undergoes permanent deformation
C.
It becomes stronger
D.
It becomes weaker
Show solution
Solution
When a material is stretched beyond its elastic limit, it undergoes permanent deformation and does not return to its original shape.
Correct Answer: B — It undergoes permanent deformation
Learn More →
Q. If a wire of length L and cross-sectional area A is stretched by a force F, what is the expression for the elongation?
A.
F * L / (A * E)
B.
A * F / (L * E)
C.
E * F / (A * L)
D.
L * E / (A * F)
Show solution
Solution
The elongation (ΔL) can be expressed as ΔL = F * L / (A * E).
Correct Answer: A — F * L / (A * E)
Learn More →
Q. If the length of a wire is doubled while keeping the cross-sectional area constant, how does its Young's modulus change?
A.
It doubles
B.
It halves
C.
It remains the same
D.
It quadruples
Show solution
Solution
Young's modulus is a material property and does not change with the dimensions of the wire.
Correct Answer: C — It remains the same
Learn More →
Q. If the stress applied to a material is doubled, what happens to the strain if the material behaves elastically?
A.
It doubles
B.
It halves
C.
It remains the same
D.
It quadruples
Show solution
Solution
According to Hooke's Law, if stress is doubled, strain also doubles for elastic materials.
Correct Answer: A — It doubles
Learn More →
Q. If the temperature of a material increases, what happens to its Young's modulus?
A.
Increases
B.
Decreases
C.
Remains constant
D.
Depends on the material
Show solution
Solution
Generally, the Young's modulus of materials decreases with an increase in temperature.
Correct Answer: B — Decreases
Learn More →
Q. If the Young's modulus of a material is 100 GPa and it is subjected to a tensile stress of 200 MPa, what is the strain produced?
A.
0.002
B.
0.0025
C.
0.01
D.
0.005
Show solution
Solution
Strain = Stress / Young's modulus = 200 MPa / 100 GPa = 0.002.
Correct Answer: A — 0.002
Learn More →
Q. In a material, if the strain energy density is given by U, what is the expression for the total strain energy stored in a volume V of the material?
A.
U * V
B.
U / V
C.
U + V
D.
U - V
Show solution
Solution
The total strain energy stored in a volume V is given by the product of strain energy density U and volume V, i.e., Total Energy = U * V.
Correct Answer: A — U * V
Learn More →
Q. In a material, if the strain is 0.01 and the Young's modulus is 200 GPa, what is the stress in the material?
A.
2 MPa
B.
20 MPa
C.
200 MPa
D.
2000 MPa
Show solution
Solution
Stress = Young's modulus * strain = 200 GPa * 0.01 = 2 GPa = 2000 MPa.
Correct Answer: C — 200 MPa
Learn More →
Q. In a shear stress-strain relationship, what does the slope of the linear portion represent?
A.
Young's modulus
B.
Shear modulus
C.
Bulk modulus
D.
Tensile strength
Show solution
Solution
The slope of the linear portion of the shear stress-strain curve represents the shear modulus of the material.
Correct Answer: B — Shear modulus
Learn More →
Q. In a tensile test, if a material exhibits a linear stress-strain relationship, what type of deformation is it undergoing?
A.
Elastic deformation
B.
Plastic deformation
C.
Brittle fracture
D.
Ductile fracture
Show solution
Solution
A linear stress-strain relationship indicates that the material is undergoing elastic deformation.
Correct Answer: A — Elastic deformation
Learn More →
Q. In a tensile test, if a material shows a linear relationship between stress and strain up to a certain point, this point is known as:
A.
Yield point
B.
Ultimate tensile strength
C.
Elastic limit
D.
Fracture point
Show solution
Solution
The elastic limit is the maximum stress that a material can withstand while still returning to its original shape.
Correct Answer: C — Elastic limit
Learn More →
Q. In a tensile test, if a material shows a linear relationship between stress and strain, it is said to be in which region?
A.
Plastic region
B.
Elastic region
C.
Yield point
D.
Fracture point
Show solution
Solution
The linear relationship between stress and strain indicates that the material is in the elastic region.
Correct Answer: B — Elastic region
Learn More →
Showing 1 to 30 of 54 (2 Pages)
