An 8-to-1 multiplexer has 1 output, which is selected from 8 different input lines.

A 16-to-1 multiplexer requires 4 select lines because 2^4 = 16.

A 4-to-1 multiplexer requires 2 select lines to choose one of the four input lines.

The binary number 1011 is equal to 1*2^3 + 0*2^2 + 1*2^1 + 1*2^0 = 8 + 0 + 2 + 1 = 11.

To convert binary 1101 to Gray code, the first bit remains the same (1), and each subsequent bit is found by XORing the current bit with the previous bit: 1 XOR 1 = 0, 1 XOR 0 = 1, 0 XOR 1 = 1, resulting in Gray code 1011.

Multiplexers help reduce the number of data lines, increase processing speed, and simplify circuit design.

If the select line is 0, the output of the 2-to-1 multiplexer will be the value of input A, which is 0.

The select lines S0=1 and S1=0 select input B, which is 1.

The binary input 10010 is equal to decimal 18, which is represented in BCD as 0001 0010.

The binary input 1001 is equal to 9 in decimal, which is represented as 0000 1001 in BCD.

The gray code equivalent of the binary number 1011 is 1110.

The binary equivalent of the decimal number 10 is 1010.

A binary to decimal converter takes a binary number and converts it into its decimal equivalent.

A binary to Gray code converter is specifically designed to convert binary numbers into their corresponding Gray code.

A binary to Gray code converter produces a code that minimizes errors in digital communication by changing only one bit at a time.

Multiplexers are commonly implemented using a combination of AND and OR gates.

A multiplexer is designed to select one input from multiple inputs based on the select lines.

Multiplexers are commonly used for data routing, allowing multiple signals to share a single communication line.

A 1-to-4 multiplexer is not a standard type; multiplexers typically have more inputs than outputs.