The half-life of a first-order reaction is given by the formula t1/2 = 0.693/k, where k is the rate constant.

The half-life of a first-order reaction is given by the formula t1/2 = 0.693/k, which shows that it is independent of the initial concentration.

The Langmuir isotherm assumes that adsorption occurs at specific sites, leading to a monolayer coverage of the adsorbate.

In the Langmuir isotherm, the maximum coverage of adsorbate on the adsorbent is referred to as a monolayer.

The maximum displacement from the rest position is defined as the amplitude of the wave.

The discriminant is 4² - 4*1*4 = 0, indicating one distinct root.

The rate constant of a reaction is affected by the nature of the reactants, temperature, and the presence of catalysts.

The resonant frequency f of an RLC circuit is given by f = 1/(2π√(LC)).

For real and distinct roots, the discriminant must be positive: 2² - 4*1*k > 0, which simplifies to k < 1.

The equation can be factored as (x + 2)² = 0, giving the double root x = -2.

Using the product of roots: k = 2 * (-6) = -12. The sum is 2 + (-6) = -4, which matches.

Using the product of roots: k = 4 * 4 = 16.

Coulomb (C) is the SI unit of electric charge.

1 Joule is defined as 1 kg·m²/s² and also equals 1 N·m, hence both are correct.

In the CGS system, the unit of energy is Erg, where 1 Joule = 10^7 Ergs.

Energy is measured in Joules, and 1 Joule is defined as 1 Newton-meter, hence both A and B are correct.

Dividing the equation by 3 gives x² - 4x + 4 = 0, which factors to (x - 2)² = 0, hence the root is 2.

Factoring gives (x - 4)(x + 2) = 0, hence the roots are 4 and -2.

The roots can be found using the factorization method: (x - 2)(x - 3) = 0, hence the roots are 2 and 3.

Enthalpy refers to the heat content of a system at constant pressure, defined as internal energy plus pressure times volume.

The capacitance (C) of a parallel plate capacitor is inversely proportional to the distance (d) between the plates. If d increases, C decreases.

According to the second law of thermodynamics, the entropy of an isolated system always increases over time.

If the magnetic field is suddenly removed, the change in magnetic flux becomes zero, leading to an immediate stop in the induced current.

When a magnet is cut into two pieces, each piece becomes a magnet with its own north and south poles, thus maintaining the magnetic field lines.

The magnetic field strength inside a solenoid increases with the number of turns, as it is directly proportional to the number of turns per unit length.

The magnetic field strength inside a solenoid is directly proportional to the number of turns per unit length. Therefore, if the number of turns per unit length is increased, the magnetic field strength also increases.

When the current in a solenoid is reversed, the direction of the magnetic field also reverses.

When the current in a wire is reversed, the direction of the magnetic field also reverses.

The magnetic field around a long straight conductor decreases with distance. Specifically, it is inversely proportional to the distance from the conductor.

As the temperature increases, the kinetic energy of gas particles increases, causing them to move faster.